THE PATENTED FREEDOM TANK TECHNOLOGY TOOL IS A MULTI-FUNCTIONAL TOOL. BELOW WE BREAK IT DOWN AND SHOW HOW THE TOOL CAN MAKE YOU MONEY, HELP THE ENVIRONMENT AND EXTINGUISH FIRES.
This same patented technology, because of where it sits in the "Flash Zone"of the tank, can extinguish tank fires in a matter of seconds. This can be done automatically and unmanned. We install an infrared camera to look at tanks for fire. If lightning, static, mechanical or terrorist act, starts a fire the camera will detect this, and we have self-stored fire foam on site. The fire foam is released in the tank covering the surface area rapidly. The foam enters the tank internally and is placed in the exact correct spot a few inches above the oil, extinguishing the fire.
ENHANCE CARBON CAPTURE
SOLVE RVP ISSUES
DETECT & EXTINGUISH TANK FIRES
The Patented Freedom Tank Tool collects vapor in the flash zone where the natural distillation process occurs. The FTT is able to capture the complete spectrum of gasses, from the heaviest to lightest gas. Our pressure transmitter is reading in the "flash zone", the most volatile area in the tank.
Compared to those that pull from the roof of a tank, or the top of a vapor tower where heavy gasses never reach, we are different! We have TOTAL carbon capture.
The Freedom Tool has had gains of 18% volume of gas pumped off the tank and increase in BTu richness of gas.
The Patented Freedom Tank Tool solves RVP (Reid Vapor Pressure) issues. The FTT captures the full spectrum of gasses from the heaviest to the lightest that traditional roof/vapor tower collection do not collect. By capturing all the gasses a few inches above the oil level, and taking them out of the tank, we are lowering the RVP.
By handling your carbon capture in the "Flash Zone", you are able to accomplish complete carbon capture.
HANDLE & TREAT BAD OIL
KEEP OIL CLEAN FOR HOT OIL PROGRAMS
CHANGE A TANK ATMOSPHERE FROM FLAMMABLE TO INERT
The Freedom Tank Technology tool is also capable of changing the tanks total atmosphere from flammable to inert. We can release nitrogen from the tool in the flash zone a few inches above the oil and purge the tank changing the atmosphere of the tank. This can be used for maintenance on tanks or for approaching storms.
The FTT tool also carries a liquid line on it that can be used for selling "bad oil". The sales lines on tanks are 10'' from tank bottoms. When producers have an emulsion and the oil is below 99% pure oil they cannot sale the oil. The emulsion will be 2' to 5' in depth on a tank bottom. If the tank is 16' tall and full, the producer must shut in wells.
With our FTT tool installed inside tanks the producer can take liquid draw from the 16' level and pump the good oil out of the tank, leaving production space to not shut in wells. The producer can now run chemical into FTT and let it release on the top level of the "bad oil". The chemical will now fall through the oil knocking out the BS&W from the oil. This saves the producer from shutting in production and helps move good oil out of the way to treat only "bad oil".
The Freedom Tank Tool has the ability to help in an "Hot Oiling" schedule. When the hot oiling truck arrive, the operator removes 90 barrels of oil from a tank battery. The oil is heated up at well #1 and is pumped down the casing of a well. This will melt the paraffin and scale from casing and production tubing along with the flow line from the well back to tank battery. All this scale and paraffin come back to the tank suspended. the operator removes a second load for well #2 along with some of the trash from #1. The operator now goes to well #2 and pumps down this well. Every time the oil is sent down a dirty well bore the trash comes back to the tank suspended. It takes several hours for the suspended particles to settle. The process is repeated at each well.
When the Freedom Tank Tool is in a tank, the hot oilier can pull from the top level of the tank. This will be above the suspended trash. The operator is no longer pulling from the sales line 10'' from tank bottoms.